If you enjoy music, then a home sound system is one of the best ways to truly experience your favorite tunes. Sometimes, however, you may encounter trouble with your sound system, which can quickly become frustrating if it’s not quickly resolved.
Rather than becoming angry, though, there are some simple steps you can take to troubleshoot your sound system and identify the source of the problem. To avoid an unpleasant listening experience, here are four ways to troubleshoot your home sound system.
Try Another Source
When troubleshooting a sound system, it’s important to take an end-to-end approach to rule out all possible causes. Since the music source is the first link in the chain, that’s the best place to begin your troubleshooting.
Stop the music on the source you were using when the trouble began and change to a different source of music. If the problem persists, you know it’s not the music source that’s the problem.
In some cases, the problem with your sound system is caused by one or more of the cables that connect the different components. To check this issue, it’s best to try and isolate each individual component to ensure they’re operating correctly. If you can isolate the speakers, amp, and any other components and see that they’re operating as they should, then there’s a good chance that the problem is with the cables.
In some instances, the problem can easily be traced to a faulty speaker. This is the easiest type of problem to detect because, at this point, the sound has traveled through the entire sound system, so you can hear the sound, it just doesn’t sound right.
If the music sounds scratchy, crackly, or tinny, or if it sounds like something that an alien might have composed, you’re likely looking at some sort of issue with your speaker. Since the problem could be in the tweeter, crossover, or woofer, it’s important to pay attention and see if the problem is occurring in any specific frequency or in all the frequencies combined.
Clean the Power
Sometimes, issues that you have with your home sound system aren’t caused by the sound system at all. Instead, the issues are caused by electronic devices in the vicinity of the sound system, resulting in some type of interference.
If you’ve tried all the components of your sound system and haven’t found a culprit, consider unplugging nearby electronic devices and see if that clears things up. Hopefully, the culprit will be some type of device that’s easy to move, resulting in an easy fix for your problems.
A great way to make troubleshooting sound system problems easier is to have a helper. A second opinion is quite important, especially with something as subjective as sound quality. If the person helping you notices the same issues and the same improvements as you, then you can be sure that the entire process was both necessary and successful.[from https://ift.tt/1n4oEI8]